The improvement of electro‐optical properties of polymer‐dispersed liquid crystals with graft copolymer matrix synthesized by reversible addition–fragmentation chain transfer and atom transfer radical polymerization

Aiming to decrease the memory effect of polymer‐dispersed liquid crystals (PDLCs), a type of graft macroinitiator, synthesized by reversible addition–fragmentation chain transfer and atom transfer radical polymerization, was employed to prepare PDLCs with graft copolymer matrix in our previous work. Compared with linear copolymer matrix PDLCs prepared using a linear macroinitiator, it was found that, although low‐memory‐effect PDLCs were obtained, the driving voltage and transmittance of the PDLCs were unfortunately sacrificed to some extent. Thus, it is necessary to improve the electro‐optical properties of PDLCs on the basis of the original research performed by us. In the work reported in this article, a kind of linear macroinitiator with high refractive index and another graft macroinitiator with flexible branched chains were employed to prepare PDLCs. The results showed that by using mixed macroinitiators, the electro‐optical properties of PDLCs could be improved, and a possible mechanism is proposed.     

Synthesis of hexacelsian barium aluminosilicate by film boiling chemical vapour process

An original oxide/oxide ceramic-matrix composite containing mullite-based fibers and a barium aluminosilicate matrix has been synthesized by the film boiling chemical vapour infiltration process. Alkoxides were used as liquid precursors for aluminum, silicon and barium oxides. The structure and microstructure of the oxide matrix were characterized by Scanning Electron Microscopy, Energy Dispersive Spectroscopy and X-ray diffraction. Apart from small residual mullite and amorphous phase amounts, the oxide matrix is composed of the hexacelsian phase, conferring to the material interesting perspectives for high-temperature electromagnetic and structural applications.     

Strengthening Mechanism and Microstructure of Deformable Ti Particles Reinforced AZ91 Composite

In this study, the deformable titanium (Ti) particles reinforced AZ91 composite was successfully prepared by powder metallurgy and subsequent extrusion. The mechanical properties and microstructural evolution of pure AZ91 and 5Ti/AZ91 composite were studied. The yield strength, ultimate tensile strength, and elongation of 5Ti/AZ91 composite are measured to be 212 MPa, 323 MPa, and 10.1%, respectively. Microstructure analysis revealed that Ti particles are elongated along the extrusion direction, forming a discontinuous strip Ti particles, fine precipitated Mg₁₇Al₁₂ phase inhibits dynamic recrystallization (DRX) behavior through Zener pinning effect and hinders the growth of matrix grains, resulting in refiner grains of 5Ti/AZ91 composite. Heterogeneous deformed Ti particles and magnesium (Mg) matrix to generate additional heterogeneous deformation-induced (HDI) strengthening. Heterogeneous deformation-induced strengthening mainly contributed to the increment of yield strength for 5Ti/AZ91 composite.     

Two-step method to deposit ZrO2 coating on carbon fiber: Preparation,characterization, and performance in SiC composites

Recently, ceramic matrix composites reinforced by short carbon fibers (CFs) attracted increasing attentions. To further improve mechanical properties and oxidation resistances, CFs were subjected to oxidation and acidification followed by sol-gel dip-coating to deposit ZrO₂ on their surfaces. ZrO₂-C_f/SiC composites were fabricated by joint hot compression molding and sintering, compared to C_f/SiC and SiC prepared by the same method. Microstructural analyses indicated that ZrO₂ coatings were successfully deposited on CF surfaces, formed strong bonding and interfaces between CF and the matrix. Meanwhile, CFs were found uniformly distributed in SiC matrix with random orientations. Flexural curves of ZrO₂-C_f/SiC and C_f/SiC revealed the presence of “false plasticity” regions after sharp drops, which were quite different from brittle flexural behavior of SiC ceramic. Compression strength of the three samples showed step-up growth. ZrO₂-C_f/SiC exhibited the highest value, indicating the introduction of CFs and ZrO₂ coatings do have great influence on mechanical performances. After heat treatment, ZrO₂-C_f/SiC exhibited better oxidation resistance than C_f/SiC, with weight loss ratios estimated to ??3.76% and ??6.43%, respectively. These improved properties indicated that ZrO₂-C_f/SiC would be excellent alternatives to other existence materials under ultra-high temperature environments.     

Effects of structural characteristics on microwave dielectric properties of low-loss (Zn1-xNix)ZrNbTaO8 ceramics

Low-loss (Zn_1-xNi_x)ZrNbTaO₈ (0.02?≤?x?≤?0.10) ceramics possessing single wolframite structure are initiatively synthesized by solid-state route. Based on the results of Rietveld refinement, complex chemical bond theory is used to establish the correlation between structural characteristics and microwave performance in this ceramic system. A small amount of Ni²⁺ (x?=?0.06) in A-site with the fixed substitution of Ta⁵⁺ in B-site can effectually raise the Q?×?f value of ZnZrNb₂O₈ ceramic, embodying a dense microstructure and high lattice energy. The dielectric constant and τ_f are mainly affected by bond ionicity and the average octahedral distortion. The (Zn_0.94Ni_0.06)ZrNbTaO₈ ceramic sample sintered at 1150?°C for 3?h exhibits an outstanding combination of microwave dielectric properties: ε_r =?27.88, Q?×?f?=?128,951?GHz, τ_f =?–39.9?ppm/°C. Thus, it is considered to be a candidate material for the communication device applications at high frequency.     

CMC jackets for metallic pipes – A novel approach to prevent the creep deformation of thermo-mechanically loaded metals

Steel materials suffer extensive creep by the application at temperatures of about 700?°C and pressures about 350?bar in a power plant environment. The presented concept overwraps a steel pipe with a ceramic matrix composite (CMC) jacket in order to support the steel pipe and provide high temperature strength. Finite Element simulations show the influence of the wall thickness of CMC jacket and the coefficient of thermal expansion (CTE) on circumferential stresses within the hybrid metal ceramic pipe. Suitable fiber and matrix materials were studied, composites fabricated and mechanical properties determined. Finally, a prototype was designed in order to confirm the feasibility of the concept. The lifetime of a pure steel pipe was increased by more than four-fold by the additional CMC jacket.     

Mechanical property degradation of high crystalline SiC fiber–reinforced SiC matrix composite neutron irradiated to ∼100 displacements per atom

For the development of silicon carbide (SiC) materials for next-generation nuclear structural applications, degradation of material properties under intense neutron irradiation is a critical feasibility issue. This study evaluated the mechanical properties and microstructure of a chemical vapor infiltrated SiC matrix composite, reinforced with a multi-layer SiC/pyrolytic carbon–coated Hi-Nicalon^TM Type S SiC fiber, following neutron irradiation at 319 and 629?°C to ～100 displacements per atom. Both the proportional limit stress and ultimate flexural strength were significantly degraded as a result of irradiation at both temperatures. After irradiation at 319?°C, the quasi-ductile fracture behavior of the nonirradiated composite became brittle, a result that was explained by a loss of functionality of the fiber/matrix interface associated with the disappearance of the interphase due to irradiation. The specimens irradiated at 629?°C showed increased apparent failure strain because the fiber/matrix interphase was weakened by irradiation-induced partial debonding.     

Mullite-bonded SiC-whisker-reinforced SiC matrix composites: Preparation,characterization, and toughening mechanisms

A novel mullite-bonded SiC-whisker-reinforced SiC matrix composite (SiCw/SiC, SiC whisker-to-SiC powder mass ratio of 1:9) was designed and successfully prepared. Before preparing the composite, the inexpensive lab-made SiCw was first modified by an oxidation/leaching process and then coated with Al₂O₃. The kinetics results indicate that the oxidation process can be described by improved shrinking-cylinder models. The aspect ratio of SiCw improved after modification. Subsequently, raw materials with a SiC–SiO₂–Al₂O₃ triple-layered structure were obtained after the Al₂O₃-coating process and used as feedstocks during the subsequent hot-pressing sintering. Finally, the characterization of the composites indicates that the mullite-bonded sample performs better (relative density of 93.8?±?1.4%, flexural strength of 533.3?±?18.2?MPa, fracture toughness of 13.6?±?2.1?MPa?m^1/2, and Vickers hardness of 20.6?±?2.5?GPa) than the reference sample without the mullite interface. The improved toughness could essentially be attributed to the moderately strong interface bonding and effective load transfer effects of the mullite interface.     

A three-stage graphics processing unit-based finite element analyses matrix generation strategy for unstructured meshes

With the development of parallel computing architectures, larger and more complex finite element analyses (FEA) are being performed with higher accuracy and smaller execution times. Graphics processing units (GPUs) are one of the major contributors of this computational breakthrough. This work presents a three-stage GPU-based FEA matrix generation strategy with the key idea of decoupling the computation of global matrix indices and values by use of a novel data structure referred to as the neighbor matrix. The first stage computes the neighbor matrix on the GPU based on the unstructured mesh. Using this neighbor matrix, the indices and values of the global matrix are computed separately in the second and third stages. The neighbor matrix is computed for three different element types. Two versions for performing numerical integration and assembly in the same or separate kernels are implemented and simulations are run for different mesh sizes having up to three million degrees of freedom on a single GPU. Comparison with GPU-based parallel implementation from the literature reveals speedup ranging from 4× to 6× for the proposed workload division strategy. Furthermore, the same kernel implementation is found to outperform the separate kernel implementation by 70% to 150% for different element types.     

采用轮廓特征匹配的红外-可见光视频自动配准

为了精确地配准近平面场景下的红外-可见光视频序列,本文提出了一种基于轮廓特征匹配的自动配准方法,通过迭代匹配目标轮廓特征来解决异源图像中配准特征的提取和匹配难题。首先,采用运动目标检测技术获取目标轮廓,并由曲率尺度空间(CSS)角点检测算法提取轮廓特征点。此后,建立全局形状上下文描述子和局部边缘方向直方图描述子描述特征,从而实现可靠的特征匹配。来自不同时刻的匹配点对被保存在一个基于高斯距离准则的特征匹配库中。最后,为了克服近平面场景中目标深度变化的影响,本文结合前景样本随机抽样策略计算配准矩阵的损失函数,完成对全局配准矩阵的更新。在LITIV数据库上对方法进行实验验证,结果表明本文方法的配准精度优于当前先进的对比方法,在9个测试视频上的平均重叠率误差仅为0.194,与对比方法相比下降了18.5%。基本满足了近平面场景下红外-可见光视频序列配准的精度要求,且具有较高的鲁棒性。